Install and tighten the screws for the transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install all 7 screws for the transmission / engine.

First tighten alternately and crosswise to light contact.

At the same time, check that the whole of the transmission is in contact with the engine.

Then tighten the screws crosswise. Tighten the screws for the transmission and engine. Tighten to 50 Nm . Tighten the screws for the starter motor. Tighten to 40 Nm .

Remove the fixture from the transmission.