Installing the gear selector cable and oil pipe
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the oil pipe on the transmission
- the transmission cable and bracket. Tighten to 25 Nm .
Connect the cable to the lever.
Connect the transmission connectors and the mounting for the air cleaner (ACL) housing bracket. Press the cable harness mounting into place on the control system cover.
CAUTION:
Check that the transmission bleed hose/valve is not trapped. There is a risk of overpressure in the transmission.