Fitting the screws for engine pads and the torque rod bracket in the gearbox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Pads And The Torque Rod Bracket Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screws, M10, to the front and rear engine pads. Tighten
the torque rod mounting on the transmission.

NOTE: Use new screws.

Tighten according to: Tightening torque