Installing the upper torque rod

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Cleaner Housing, Hoses And Electrical Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the torque rod. See Install the upper torque rod .
NOTE: Use a new lock nut for the cross member mounting on the engine.
the air cleaner (ACL) housing with all hoses and electrical terminals.

Connect the battery lead

First read Battery, disconnecting .

Test driving

Check the coolant level and fill if necessary.