Installing the bevel gear

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bevel Gear Hung Up With A Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Bevel Gear Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the tie strap.

Install the bevel gear.

Align the propeller shaft on the bevel gear and rotate the bevel gear into position. Install new screws. Tighten the screws crosswise lightly.

Tighten. Tightening torque .