Installing the gear selector cables and oil line

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gear Selector Cables And Oil Line

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the ground cable with bracket to the sub-frame
the oil pipe to the gearbox
the gear selector cables with the bracket, 2 x M8. Tighten.

Connect the cable to the lever. Connect the gearbox connector and the bracket to the air cleaner (ACL) housing bracket.

Press the cable harness bracket onto the control system cover.

CAUTION: Check that the gearbox air bleed hose/valve is not trapped. Risk of overpressure in the gearbox.