Installing and tightening the screws to the gearbox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox And Engine Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fit the screws, 7x M10, to the gearbox/engine.

First tighten alternately and crosswise with light contact, while checking that the gearbox and engine are in contact all the way around.

Following which, tighten the screws with light contact crosswise to the gearbox/engine. Tighten.

Remove the fixture from the gearbox.