Installing the dip stick pipe and oil hose on the oil cooler. Install the 3 screws for the transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Rod Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the lower oil cooler hose on the transmission. Tighten to 10 Nm
the dip stick pipe in the transmission. Tighten to 10 Nm
the screws for the transmission. Tighten the two larger screws. Tighten to 50 Nm . Tighten the smaller screw. Tighten to 25 Nm .