Removing the lever on the gear shift linkage rod

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Lever On Gear Shift Linkage Rod

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the lever on the gear shift linkage rod
the screw for the gear selector sensor and cable harness.

Twist out the tab on the cable harness holder.