LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Transmission - Fluid Specifications, Removal & Installation (Coupe)) >> Transmission Electrical >> Oil Temperature Sensor, Wiring Harness, Replacing >> Removal >> Lowering the Sub-Frame

Lowering the Sub-Frame

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sub-Frame Front And Rear Screws
GLL109349Courtesy of VOLVO CARS OF NORTH AMERICA.

Position the mobile jack lightly applied under the left side  of the sub-frame. Remove the front and rear screws from the sub-frame.

Carefully lower the frame a little. Check that the screws for the steering gear release from the frame and the control arm releases from the ball joint. Lower the sub-frame completely and let it hang free.