Installing the lifting beam and lifting hook
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
Install lifting beam
9995716
directly above the engine lifting eye. Position the lifting beam brackets as illustrated.
Connect hook
9995460
to the lifting eye at the rear edge of the engine. Apply the hook to take the load off the engine pads.