Control Arms Adjustment
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Detach the control arms from the link arm
- Remove the nut from the link arm
- Run the motor to the parked position
- Adjust the position of the link arm. The link arm must be parallel with the outer control arm
- Apply thread sealant liquid P/N 9961053-2 to the threads of the motor shaft
- Tighten the nut. Use a 20 mm fixed wrench on the link arm as a counterhold
- Install the control arms
- Test drive the mechanism.