Connect the cable harness

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Temperature Sensor Holder Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the O-rings for the cable harness grommet and the oil temperature sensor with automatic transmission fluid.

Install:

the cable harness. Connect the connectors to the solenoids
the oil temperature sensor with the holder and screw. Tighten to 10 Nm
the cable harness on the holder. Check that the cable harness is correctly positioned.