Assemble the Connector

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Connector Bases, Connector Halves, Rubber Seal And Cable Ties

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the sockets on the connector.

Reassemble the connector.

Ensure that the rubber seal is in position.

Install the cable clamps around the cable harnesses and the rubber seal.