Installing the right-hand engine mounting
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install the right-hand engine mounting. Use new screws. Tighten to 35 Nm . Angle-tighten 90° .
Fold the fender liner back into position.
Install:
- the skid plate
- the plastic nuts
- the front wheels. See Installing wheels .