Removing the Balls
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Turn the inner joint ring and ball holder. Remove the ball bearings clockwise one by one.
Use the marking as the starting point when removing. See Marking the Outer Ring For the Outer Constant Velocity Joint, Ball Holder And Inner Ring .
Place the ball bearings in order so that they can be reinstalled in the same positions.