LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Transmission - Adaptation (Coupe)) >> Removal & Installation >> Flanged Joint, Assembling >> Gaiter CV Joint, Replacing >> Cleaning/Checking the Outer Constant Velocity Joint >> Removing the Ball Holder And Inner Ring From the Drive Shaft

Removing the Ball Holder And Inner Ring From the Drive Shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Ball Holder And Inner Ring From Shaft
GLL108679Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the inner ring 90 degrees in relation to the ball holder.

Remove the inner ring.

scientia non olet · About LEMON Manuals