Installing the Clutch Fork
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Lubricate the following surfaces on the release fork with assembly compound, part no. 1161246-2:
- the seat for the joint ball
- all surfaces on the fork in contact with the throwout bearing
- the seat for the control cylinder push rod.
Install:
- the release fork and the dust boot.
- the throwout bearing.
- fit the throwout bearing in the fork and on the sleeve. Secure the fork with a strap to keep the throwout bearing in position during installation.