Checking the Pressure Plate For Out-Of-True

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking Pressure Plate For Out-Of-True

Courtesy of VOLVO CARS OF NORTH AMERICA.

Wipe the pressure plate friction area clean.

Check any out-of-true carefully. Use a ruler and a feeler gauge. Out-of-true is permitted in one direction only.

Out-of-true must not exceed 0.2 mm . If out-of-true is greater, replace the clutch.

The clutch must be replaced as a complete unit.