LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Transmission - Adaptation (Coupe)) >> Removal & Installation >> Checking And/Or Replacing the Clutch And Clutch Driven Plate >> Installation >> Installing the Clutch Driven Plate

Installing the Clutch Driven Plate

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Clutch Driven Plate
GLL109096Courtesy of VOLVO CARS OF NORTH AMERICA.
CAUTION: Turn the slightly longer part of the clutch driven plate hub in towards the flywheel. There is a marking on the clutch driven plate  .

Install the cone on the centering tool. Tighten the cone (by hand)  . Secure the clutch driven plate.

NOTE: Tightening tools must not  be used on the cone or damage may be caused to the clutch driven plate.
scientia non olet · About LEMON Manuals