Removing the Carrier Plate

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine speed (RPM) sensor with the bracket. Place it to one side.

Fig 1: Blocking Carrier Plate Using Gear Sector 999 5112

Courtesy of VOLVO CARS OF NORTH AMERICA.

Block the carrier plate using gear sector .

Remove:

all screws
the carrier plate
gear sector .

Fig 2: Checking Crankshaft Seal For Leakage

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check the crankshaft seal for leakage.

To replace the crankshaft seal, refer to the car model and year.