Installing the Brake Disc And Caliper Holder

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Disc And Caliper Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the brake disc.

NOTE: Be careful when handling the new brake disc. Careless handling can cause damage to the brake disc (out-of-true).

Install:

the new brake disc. Tighten the locating pin. Tighten. See Tightening Torque
the brake caliper and the caliper holder. Use 2 new mounting screws. Tighten. See Tightening Torque .