Taking Measurements

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Measuring Over Wheel Spindle And Spring Strut At Upper Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Measure over the wheel spindle and spring strut at the upper screw as illustrated.

Clean off any dirt and contamination from the measuring surfaces.

Note the measurement. The measurements are made so that the same camber angle can be obtained when installing.