Gear-Shift Position Sensor Position
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
P/R/N/D/4/3/L = normal gear positions.
OR/OD/OL = Undefined R, D or L positions. The signals from the gear-shift position sensor are outside the normal range but this not interpreted as a fault. This can be because the gear selector is between positions or that the gear-shift position sensor is incorrectly adjusted.
FAULT = the gear-shift position sensor has transmitted the wrong combination of signals and a diagnostic trouble code (DTC) has been stored.