Adapting a drift
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
To facilitate removal of the CVJs, grind a drift as shown in the illustration. Rounding the lower edge (R) means that the drift will not catch in the drive shaft circlip groove. The sharper angle (approx. 60°) means that drift has a greater surface contact with the inner ring.