Fitting the hatches and connections to the tank fitting

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Cover And Connectors For ABS Sensor And Fuel Level Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

front and rear hatch in the body and the connector holder. Make sure the rubber seal around the wiring is properly fitted when the rear hatch is fitted.
connectors to the tank fitting, fuel pump and ABS system.