Installing the Centering Tool For The Clutch Driven Plate
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Use centering tool 9995663 . The drift is modified as described in the Workshop Guide. The conversion kit is included.
Remove the cone from the centering tool.
Install the centering tool in the flywheel center as far in as possible.
Use a wrench as a counterhold. Tighten the outer socket so that the drift expander locks the centering tool.
Feel to see that the centering tool is secured in the crankshaft.