LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Clutch - Removal, Replacement And Installation (Coupe)) >> Clutch (M56; 1998-2002) >> Checking And Replacing The Throwout Bearing >> Installing the Rubber Seal For The Pipe In The Clutch Cover

Installing the Rubber Seal For The Pipe In The Clutch Cover

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rubber Seal For Pipe In Clutch Cover
GLL109086Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the rubber seal locates all the way around.

NOTE: To install the transmission, refer to the car model and year.