Check the cable terminal is correctly located in the crimp tool jaws

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Correct Placement Of Cable Terminal In Crimp Tool Jaws

Courtesy of VOLVO CARS OF NORTH AMERICA.

If the cable terminal is not correctly located

If the cable terminal has turned, moved forward or backwards, or is in the wrong cable area profile section, abort the crimping operation, see To abort a terminal crimping operation .

If the cable terminal is located correctly

Proceed to Locate cable in the cable terminal .