To abort a terminal crimping operation
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
The crimp tools have a ratchet in the grip section. See illustration.
- Use a screwdriver to lift and release the ratchet.
- Reposition the cable terminal correctly in the insert and proceed with operation Locate cable in the cable terminal .
If the cable terminal is damaged
If the cable terminal has already been deformed replace with a new cable terminal and start again from operation Place the cable terminal in the tool .