Installing the left drive shaft on the transmission and the wheel spindle
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Press in the constant velocity joint housing firmly. Press so that the snap ring engages in its groove in the transmission. Pull the constant velocity joint to check that the drive shaft is secure.
Lubricate the drive shaft splines. Use a small amount of thin oil.
Locate the drive shaft in the wheel hub. Install a new screw loosely in the drive shaft.