Replacing seat belt buckle
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect the connector.
Remove two tie straps.
Route wiring.
Remove the screw for the seat belt buckle, (Torx 50).
Install:
In reverse order.
Tighten the seat belt buckle screws to 48 Nm (35.4 lb. ft).