Removing the Water Pump

Fig 1: Identifying Hose Clamps & Water Pump

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install hose clamps on the hoses connected to the water pump.

Position a container under the water pump to collect the coolant.

Disconnect the hoses.

Remove the connector.

Fig 2: Identifying Holder, Nuts & Pump

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 2 nuts retaining the pump holder.

NOTE: Note the position of the water pump on the holder.

Hold the damper. Pull the water pump off.