Dashboard Vent, Side Defroster (Driver's Side)

Fig 1: Identifying Weatherstrip Tool & Side Vent

Courtesy of VOLVO CARS OF NORTH AMERICA.

Removal 

• Remove the side panel on the dashboard
• Remove the outer vent on the driver's side. See The Outer Vents On the Dashboard And the Seal 
• Position a weatherstrip tool under the outer side of the side vent
• Insert your hand through the opening on to the catch for the outer vent and press the vent up and off.

Installation 

• Position the pipe duct in position through the opening for the vent
• Position the vent and press it into place
• Install the outer vent. See The Outer Vents On the Dashboard And the Seal 
• The side panel on the driver's side of the dashboard.