Air Vent Center Dashboard, Replacing

Fig 1: Detaching Catches Closest To Weatherstrip Tool And Prying Out Vent At Same Time

Courtesy of VOLVO CARS OF NORTH AMERICA.

Removing the center vent 

Position a weatherstrip tool between the panel and the dashboard on the short side of the vent.

Detach the catches closest to the weatherstrip tool and pry out and detach the vent at the same time.

Fig 2: Connector For Hazard Warning Signal Flasher

Courtesy of VOLVO CARS OF NORTH AMERICA.

Disconnect the connector for the hazard warning signal flasher.

Installing the center vent 

Connect the connector for the hazard warning signal flasher.

Press the panel into place.