To abort a terminal crimping operation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
The crimp tools have a ratchet in the grip section as shown.
- Use a screwdriver to lift and release the ratchet.
- Reposition the cable terminal correctly in the insert and proceed with Locate cable in the cable terminal .
If the cable terminal is damaged
If the cable terminal has already been deformed replace with a new cable terminal and start again from Place the cable terminal in the tool .