LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Cables And Fuses - General Information) >> Ground Points And Oxidation (1999-2000) >> Ground points and oxidation >> Surface oxides

Surface oxides

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

All metal surfaces oxidize in contact with air. This makes it important to fit a cable terminal on a stripped cable for crimping as soon as possible after stripping the cable.

Most cable terminals are tin plated. Tin oxidizes rapidly and the surface oxide coating makes a hard layer on the soft tin which cracks easily when a pin or socket is attached to create a contact.

The surface oxide around contact points protect build a gas tight joint which prevents further oxidation and provides a good electrical contact.