Position the shaft in a vice
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Ensure that the shaft is absolutely free of grease. Brush the shaft and the hole in the vibration damper with soapy water.
Use drift 9992412 . Tap the vibration damper on. Dry the soapy water off the shaft. Adjust the damper to the measurement noted previously. See Only drive shafts with vibration damper: .