LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Boot, half shaft, replacing >> Cleaning/checking the outer constant velocity joint >> Lubricate the constant velocity joint thoroughly

Lubricate the constant velocity joint thoroughly

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Constant Velocity Joint
GLL108682Courtesy of VOLVO CARS OF NORTH AMERICA.

Apply grease behind the joint via the shaft hole in the inner ring.

Use half of the grease packet. The remainder will be used later in the gaiter. See Apply grease in the boot .