Installing the transmission cable bracket on the transmission and the cable on the lever

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission Cable At Lever And Cable Bracket Screws On Transmission

Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten with 25 Nm .

Install:

the large connector. Lock it into place
the bracket with the oil pipe. Press the dip stick pipe into place in the transmission oil pipe
the two cable conduit nuts. Tighten to 10 Nm
the connector furthest in at the cable conduit
the oil pipe on the transmission. Tighten to 25 Nm .

CAUTION:

Check that the transmission bleed hose / valve is not trapped. There is a risk of overpressure in the transmission.