Installing the sub-frame on the bodywork
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use 4 new M14 screws. Lubricate the screw threads.
NOTE:
When the sub-frame is raised, ensure that the screws for the steering gear locate in the frame.
Begin the installation of the sub-frame on the right-hand side.
Use the mobile jack to lift the frame towards the bodywork until the frame is approximately 10 cm from the bodywork.