Installing the remaining screws for the transmission and starter motor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission / Starter Motor Mounting Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screws for the transmission and engine. Tighten to 50 Nm
the screw for the starter motor (number 5 in Figure). Tighten to 40 Nm .