Installing the dip stick pipe and oil hose on the oil cooler. Install the 3 screws for the transmission

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lower Transmission Oil Cooler Hose, Dipstick Pipe, And Transmission Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the lower oil cooler hose on the transmission. Tighten to 10 Nm
the dip stick pipe in the transmission. Tighten to 10 Nm
the screws for the transmission. Tighten the two larger screws. Tighten to 50 Nm . Tighten the smaller screw. Tighten to 25 Nm .