Installing and tightening the screw for the rear engine pad

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Screw & Rear Engine Pad

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift the anti-roll bar mounting a few mm. Use a jimmy bar. This makes it easier to insert the tool and the screw. Tighten to 50 Nm .