Installing the connector and cable harness
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Hook the connectors into place on the mounting. Connect the connectors.
Install:
- the tie straps around the cable harness. Secure the cable harness in the cover for the control system
- the mounting for the cable harness on the bracket for the air cleaner (ACL)
- the gear selector cable and bracket. Tighten. See: Summary of tightening torques for specific components . Connect the cable to the lever.
Install the air cleaner (ACL) housing.