Assembling the connectors
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Assemble the sockets for the oil temperature sensor and solenoids with the other sockets.
Install the sockets in the casing.
Install the rubber seal in position.
Secure the cable harnesses and the rubber sleeves. Use cable ties.