LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Transmission - Removal, Replacement And Installation - 1 Of 2) >> Auxiliary Transmission, Bevel Gear And Overdrive (B5254T2, Aw50/51 AWD; 2004-2006) >> Bevel gear >> Installation >> Installing the drive shaft

Installing the drive shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Unhooking Control Arm From Ball Joint Using Lever 999 7076
GLL157718Courtesy of VOLVO CARS OF NORTH AMERICA.

Align the drive shaft in the hub.

Depress the control arm. 9997076

Align the ball joint in the control arm

NOTE:

Position the tool so that it does not damage the boot on the ball joint.

scientia non olet · About LEMON Manuals