Installing members

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Exhaust Pipe And Three-Way Catalytic Converter (TWC)

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the front member on the bodywork, exhaust pipe and three-way catalytic converter (TWC). Press the brake pipe into place in the mountings on the member.

Tighten:

the 4 x M8 screws for the front member
the 4 x M8 screws for the support for the center bearing
the 2 x M8 screws for the propeller shaft center bearing.