Installing front suspension components
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- screw for driveshaft/wheel hub. Use new screws. Torque tighten to 35 Nm. Angle tighten to 90°.
- the wheel
- install the wheel studs lightly. Then tighten them crosswise to 140 Nm. Use torque socket 9512835 if an impact wrench is being used.