Removing the brass pipe

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bevel gear. See:

Fig 1: Removing/Installing Brass Pipe Using Cutting Nippers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull out the brass pipe using cutting nippers.

Fig 2: Identifying Tapping In Nipple Using A Rubber Mallet And Installing Filter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Tap in the nipple using a rubber mallet.

Install the filter on the nipple.